1-1/2″ Dr x 48mm GREY PNEUMATIC 6048M

Socket,1-1/2 In.Dx5-7/8 In.Standard

Features

• Item: Socket,1-1/2"Dx5-7/8"Standard
• SAE or Metric: Metric
• Material: Molybdenum Alloy Steel
• Number of Points: 6
• Drive Size: 1-1/2"
• Overall Length: 87mm
• Finish: plated
• Size: 48mm
• Socket Type: Standard Length Impact

• Item Type: Socket
• Brand: GREY PNEUMATIC
• Manufacturer Part Number: 6048M

Tool Kit Product Grouping Tool Kits, Tool Families Included Cutting Tools, Electrical and Telecomm Tools, Communications Tool Kit, Number of Pieces 5, Number of Cutting Tools 1, Number of Drilling, Extracting, and Tapping Tools 1, Number of Electrical and Telecomm Tools 3, Insulated / Uninsulated Uninsulated, Nonsparking No, Tool Storage Included Yes, Tool Storage Type Included Pouch

Features

• Features: Specifically Configured Tool Kits, Free Tool Pouch Perfectly Sized for The Tool Kits
• Capacity: RG-59, RG-6, and RG-11
• Tool Storage Type Included: Pouch
• Drilling, Extracting, and Tapping Tools: Drill Guide
• Cutting Tools Included: Carpet Cutter
• Tool Kit Product Grouping: Tool Kits
• Number of Drilling, Extracting, and Tapping Tools: 1
• Tool Families Included: Cutting Tools, Electrical and Telecomm Tools
• Includes: Drop Cable Cutter, Drop Cable Splitter, Drop Cable Compression Tool, Wing Ding Pack, Carpet Cutter and Drill Guide
• Application: The PIK is a Cable Assembly Tool Kit Specifically for Drop Applications
• Number of Electrical and Telecomm Tools: 3
• Tool Storage Included: Yes
• Nonsparking: No
• Number of Cutting Tools: 1
• Drilling, Extracting, and Tapping Tools Included: Drill Guide
• Item: Communications Tool Kit
• Insulated / Uninsulated: Uninsulated
• Sub-Category: Telecomm Service
• Number of Pieces: 5
• Electrical and Telecomm Tools Included: Drop Cable Cutter, Drop Cable Splitter, Wing Ding Pack
• Standards: SCTE

• Item Type: Communications Tool Kit
• Brand: CABLE PREP
• Manufacturer Part Number: PIK-659HPT
• Made in the United States
• Includes: Drop Cable Cutter, Drop Cable Splitter, Drop Cable Compression Tool, Wing Ding Pack, Carpet Cutter and Drill Guide

Manufacturer Part Number: 78830

Heavy Duty Hub Drum and Rotor
Puller Kit

The Astro Pneumatic Tool 78830 Heavy Duty Drum and Rotor Puller Kit is used with a 1-1/4" socket and 1-1/4" or 32mm wrench to remove hubs, drums and brake rotors. This tool's durable forged design is made from the same alloy as Astro's famous ball joint press. Includes: Long 7/8" thread 1-1/4" drive Grade 8 Drive Bolt Forged T-Bar Forged Hub Puller Arms Forged Drum/Rotor Puller Arms Long and short hex nuts Small, Medium and Large Hub Adapters Hardened Washers

The OTC heavy duty brake drum and rotor puller handles large components such as brake drums, rotors, drive wheels, gears, flywheels and pulleys. One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws. Can be used with air tools to reduce time and fatigue. Spread is up to 12-3 & 4 in. with a reach of 5 in. 7 - tons of force, yet weighs less than 10 pounds.

Features

• Handles large components such as brake drums rotors drive wheels gears flywheels and pulleys
• One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws
• Can be used with air tools to reduce time and fatigue
• Spread is up to 12 - 3 & 4 in. with a reach of 5 in.
• 7 - tons of force yet weighs less than 10 pounds

Specifications

• Weight: 21 lbs

- SKU: EGLE45427

A 5 Piece Carbon Steel Wood Turning Set. These traditionally 1/2-Inch tools are produced from high-quality carbon steel with a Rockwell hardness of 57/60. Mounted on 8-Inch lacquered Ash handles with a brass ferrule for added strength. Features: Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, England, High Speed Steel, Up to 6 times the edge life of carbon tool, Ergonomically designed Rosewood handles with heavy duty brass ferrules.

Tube benders come with different handle types and bend angle capabilities. Take a look at the features for Ridgid Tube Bender. Application: For Stainless Steel, Titanium, and Other Types of Hard Tubing, Features: In-Plane Bends, Long Handles and Rollers, Clamp Block for Vise Bending, Handle Type: 2-Stage, Cushioned Grip.

Features

• Overall Length (In.): 16-1/8
• Bend Angle (Deg.): 0 to 180
• Type: Lever
• Markings: 0, 45, L, R Alignment On Carriage, 90-180, 0-90, Lock, Unlock On Carriage Handle, 0-180 Deg Angle Marking On Form
• Centerline Bend Radius: 5/8"
• Features: In-Plane Bends, Long Handles and Rollers, Clamp Block for Vise Bending
• Application: For Stainless Steel, Titanium, and Other Types of Hard Tubing
• Outside Dia. Tubing (In.): 1/4
• Handle Type: 2-Stage, Cushioned Grip
• Item: Tube Bender
• Calibration Increments (Deg.): 15
• Construction: Carbon Steel

• Item Type: Tube Bender
• Brand: RIDGID
• Manufacturer Part Number: 38033
• Features: In-Plane Bends, Long Handles and Rollers, Clamp Block for Vise Bending